technical data sheet rpc-2.92 jack 2-hole flange 02K702-800L3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich g eschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.1 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 61169-35 mechanically compatible with rpc-3.50 and sma center conductor glued to mate with 99s205-40ml3 documents datasheet 99s205-40ml3 material and plating connector parts material plating center contact cube gold, min. 1.27 m, over chemi cal nickel outer contact cube or equiv. aurodur?, gold plated dielectric ptfe screws stainless steel tuflock coating glue 2 component adhesive
technical data sheet rpc-2.92 jack 2-hole flange 02K702-800L3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich g eschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.1 f(ghz) electrical data impedance 50 w frequency dc to 40 ghz return loss 3 26 db, dc to 4 ghz 3 23 db, 4 ghz to 26.5 ghz 3 19 db, 26.5 ghz to 40 ghz insertion loss 0.01 x db insulation resistance 3 5 g w center contact resistance 3.0 m w outer contact resistance 2.0 m w test voltage 750 v rms working voltage 250 v rms rf-leakage 3 100 db up to 1 ghz mechanical data mating cycles 3 500 center contact captivation: axial 3 20 n coupling test torque 1.70 nm recommended torque 0.80 nm to 1.10 nm environmental data temperature range -40c to +125c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 rohs compliant tooling n/a suitable cables n/a packing standard 50 pcs in blister weight 3.5 g/pce draft date approved date rev. engineering change n umber name date armin maiw?lder 13/01/14 szabo levente 10/02/14 20 0 14-v078 thomas leitner 10/02/14
|
